Instagram

Keep track of what I’m up to

Home for the next few days. I’m out with @wanderer.metalworks for a six day engraving class. Absolutely thrilled to be here. Stay tuned for progress.

100 1
SOLD: This is a new design, one I think I’ll explore further. It features a 3.5” blade and a 4” handle. A friend commented, “it’s like a sgian dubh that dreamed it was a bowie.” The blade is high carbon damascus and the handle is family heirloom gunstock walnut. The bolster is blued steel with 22 karat gold inlay. #classy #edcknives #handmadeknife #craft

137 5
New skill unlocked! This is 22ky gold wire inlaid into steel, a technique I’ve wanted to learn for years! #goldinlay #engraving #embellishment #learning

177 14
Attention to detail matters. I’ve just sized down some 1-72 screws for a pair of folders I’m working on. The one on the left is .2375” long, an as-manufactured 1/4” screw. The one on the right has been sized down to .2465”, the maximum length allowable in my build. The additional length yields ~18% more thread engagement, which means a sturdier build overall. #attentiontodetail #detailsmatter #foldingknives #foldingknife

55 2
AVAILABLE: A Trail Hawk in AEB-L stainless steel and curly maple. 4” blade, 8.5” overall. This model is designed as a real all-rounder for use in the field. Hiking, hunting, camping, yard work, etc.; just a lot of utility packed into one knife. This one features some grippy jimping along the spine and red G10 liners. Comes with a brown belt sheath. #handmadeknife #fieldknife #huntingseason #edcknives

230 0
PODCAST! I am featured on the latest episode of the Crafted podcast, by Blister. You can find it on any podcast app (episode 128) or by visiting blisterreview.com. It’s a little over an hour long, and if you’ve ever wondered what I’m all about, this is not a bad way to get to know me a little better.

79 1
SOLD: a Dart in New England Breeze stainless damascus and stabilized sycamore, with micarta and G10 accents. The blade is 4”, and the whole piece is 8.5”, with a D-shaped handle. The Dart lands somewhere between a paring knife and a petty chef. #kitchentools #kniferoll #foodie #gourmand

164 1
SOLD: A 7” chef heading out the door this morning. The blade is 90 layer high carbon damascus, and the handle is stabilized gray curly maple with a micarta/g10 bolster. #chef #yeschef #culinary #finecooking #foodie

148 0
AVAILABLE 8/21/26 - A Japanese inspired slicer in 250 layer high carbon ladder damascus. The blade is just under 10”, and the whole piece is just over 15”. The handle is mesquite, micarta, and g10. #luxurydining #highperformance #handmadeknife #masterbladesmith

142 3
SOLD (08/21/26) - This knife features a ~4” blade in 200 layer high carbon ladder damascus, with stabilized curly maple and a micarta guard. The whole knife is about 8.5”. Send me a message if you’re interested. First come first served. #huntingknife #droppointhunter #handmadeknife #damascussteelknife

132 2
AVAILABLE: A “Stub” in 45 layer high carbon Texas wind damascus and stabilized maple. #handmadeknife #customknife #damascussteelknife #outdoors

97 2
Liner lock! I’ll have this with me at @leagueofnhcraftsmen annual fair at Mount sunapee August 1-9! Tent 6, 10a-5p daily.

263 22
(AVAILABLE) - A 7” chef in AEB-L stainless steel and stabilized New Hampshire birch. This is a real workhouse, meant for everyday service in your kitchen. This is one of a limited selection of knives I’ll have with me at the @leagueofnhcraftsmen Annual Craftsmen’s Fair at Mount Sunapee August 1-9. I thought I’d share a few in advance for those of you who can’t make it in person. Please message me if you’re interested. First come, first served. #chefknife #nhfoodies #newhampshire #handmadegift

100 0

Learn about the process

Come take a peek behind the curtains and learn a little bit about the work that goes into my knives.

About Zack Jonas

I won’t bore you with my whole life story, but if you would like to know a little more about me, here’s the abridged version.